The correct control of CNC bending machine method

　1. First of all, turn on the power supply, turn on the switch on the control panel, and then start the oil pump, so as to hear the sound of oil pump rotation.(at this time, the machine does not move)

　　2, stroke regulation, use must pay attention to the regulation of stroke, must be tested before bending.It must ensure that the upper die down to the bottom when there is a thickness of the plate clearance.Otherwise, it will cause damage to the mold machine.Stroke adjustment is also a quick adjustment of the electric.

　　3, bending groove choice, generally choose the plate thickness of 8 times the width of the groove.If the bending of 4mm plate, need to choose about 32 slots.

　　4, after the block adjustment is generally electric quick adjustment and manual fine-tuning, the method is the same as the plate shears.

　　5, step on the foot switch to start bending, CNC bending machine mold and shearing machine is different, you can always loosen, loosen the foot